产品分类

Mad Professor Mighty Red Distortion HW 手焊版 失真单块效果器

MRD是一种高增益失真效果器,它是模仿80年代风格的压缩增益音色,同时极具动态,提供高清晰度的强失真。

  • 型号: Mad Professor Mighty Red Distortion HW 手焊版 失真单块效果器
  • 价格: 1850
  • 产地:

MRD是一种高增益失真效果器,它是模仿80年代风格的压缩增益音色,同时极具动态,提供高清晰度的强失真。增益范围也可以实现低失真与其他踏板堆叠,可以用其他过载单块作为前置推子,以达到极端和高度集中的声音。为了得到这些增益水平与令人印象深刻的信噪比,我们没有使用任何噪声门或扩展器。相反,我们使用了特殊的放大器技术和极低噪声的放大器级,这导致了自然衰减和高电流消耗。


MRD拥有许多人渴望的80年代的声音,但从未在如此低的噪音水平。Presence控制的目的是控制中高音,这样你就可以得到你想要的高音。

操控:

VOLUME: 音量

DISTORTION: 失真度

PRESENCE: 中高频提升 

配置

供电: 7,5 to 18VDC

电流: 10,6 mA / 9VDC


标准版演示视频:

原文介绍:

MRD is a high-gain distortion pedal, which was modeled after the 80′s style compressed gain sounds. It is extremely easy (and a lot of fun) to play because its texture is adjusted to give clarity and definition also at heavy distortion. The gain range allows also low distortion sounds as well as stacking with other pedals, where an overdrive (preferably MP LGW) can pre-drive MRD for extreme and highly focused sounds. To get these gain levels with their impressive signal to noise ratio, we didn’t use any noise gate or expander. Instead, we used special amplifier techniques and extremely low noise amplifier stages, which result in a natural decay and a rather high current consumption for a distortion pedal in view of battery operation.


MRD has that 80′s sound many have longed for but never got before at such low noise levels and versatility. The Presence control was designed to control the upper treble, but not to affect the upper midrange, so that you can get the exact treble you desire. You can master anything from fat warm singing distortion to screaming cutting leads with the MRD’s Presence control.


Step into your spandex trousers and plug in the Mighty Red Distortion pedal!

VOLUME: Sets the level of distorted signal DISTORTION: Controls the amount of distortion PRESENCE: Controls upper treble, while not affecting the upper midrange so you can adjust tones from warm and sweet into cutting leads with an attitude.  

ELECTRICAL SPACIFICATIONS 

Supply voltage range: 7,5 to 18VDC

Current consumption: 10,6 mA at 9VDC

Max gain: 62dB

Max output: 1V pk-pk or 500mV rms

Signal/Noise ratio: approximately 96dB

Complete bypass (true bypass)