VINTAGE FUZZ电路使用了4个老式锗晶体管，可以直观切换。AC128提供了一个平滑柔软的低增益法兹。NKT275提供了一个更明亮更靠前的法兹音色。您还可以使用AC128s和NKT275s的混合，以获得更多的音色选项。 内部开关可以切换经典复古或延长低频响应，复古输出或提高输出，这使您很容易驱动电子管。此外，电池模拟器打开或关闭，这有助于踏板的音色，似乎是从电池运行时，使用9v直流输入。如果使用外部电池盒运行fuzz，则内部开关可以让电池电源直接注入电路。 VINTAGE FUZZ使用了精心设计的定制印刷的电路板。这款踏板使用了稀有的复古组件，重现几十年来一直为人所爱的经典法兹音色。
KingTone VINTAGE FUZZ 经典法兹 单块效果器
VINTAGE FUZZ是KingTone法兹类产品中的旗舰型号，带来让人痴迷的复古法兹音色。
VINTAGE FUZZ使用了2组4个老式锗管（AC128和NKT275），
其中AC128提供了一个平滑柔软的低增益法兹。
NKT275提供了一个更明亮更靠前的法兹音色。
对于2组锗管的选择可通过面板直观切换，您还可以使用AC128和NKT275的混合，以获得更多的音色选项。
VINTAGE FUZZ还配有一个BAIS偏压调节系统，通过调节此旋钮可以更好地控制锗管温度，寻找最合适的音色。
VINTAGE FUZZ还提供了2个内部开关，可以分别针对BASS低频和OUTPUT输出增益进行调节：BASS滑块可以切换VINATGE经典模式或FAT延长低频响应模式，OUTPUT输出滑块可以设置为VINATGE经典模式或BOOST激励模式，这使您可以更加精确地控制音色。
VINTAGE FUZZ使用了精心设计的定制印刷的电路板。这款踏板使用了稀有的复古组件，重现几十年来一直为人所爱的经典法兹音色。
演示视频：
规格：
尺寸：长宽 4.7″ x 3.7″ (120mm x 94mm) 高： – 1.34″ (34.00mm)
产地：美国
供电：9V反极（内正外负），如使用普通正极电源请链接极向转换线
原文介绍：
THE ‘JESSE DAVEY’ VINTAGE FUZZ PEDAL.
4 Vintage Germanium Transistors
NKT275/AC128 Switchable
True Bypass
External Bias Adjustment Allows For Easy Tonal or Temperature Refinement.
Hand Wired with Carefully Selected Components
Internal Switches for Vintage/Fat – Bass Response.
Internal Switches for Vintage/Boost – Output Levels.
Fat Fat, did I say ‘Fat’ Tone!
Neutrik Jack Sockets
Runs on Standard 9 Volt Battery or DC jack Socket.
9v DC Input has Battery Simulator – The Pedal Sounds Great Even When Using 9v DC Power. (Can be switched off)
Internal Switch Allows the Pedal to Run Efficiently on an External Battery Box.
Built To Last A Lifetime
Size / Dimension – 4.7″ x 3.7″ (120mm x 94mm)
Height – 1.34″ (34.00mm)
The switches open up huge tonal possibilities. The fuzz circuit uses four vintage Germanium transistors, the switches allow you to select between two of the most popular types used in fuzz pedals. The AC128’s give a smooth softer fuzz with slightly lower gain. The NKT275’s offer a brighter more aggressive fuzz tone. You can also use a mixture of AC128s and NKT275s for even more tone options.
Internal switches allow for classic vintage or extended bass response, vintage output levels or boosted output, which makes it easier to drive your tube amp. Also battery simulator ‘on’ or ‘off’ which helps the pedal sound like it is running from a battery when using a 9v DC input. If running the fuzz with an external battery box, an internal switch allows the battery power to be directly injected into the circuit.
The design of the pedal not only looks great on your pedal board but is also very solidly
constructed. Hand wired on a carefully designed custom PCB. This pedal uses rare vintage components and produces the classic fuzz tones heard and loved for decades and gives you more clarity, more playability, more low end ? and a more controllability, all this without sacrificing the classic fuzz tone.
